DIY {Tile Coasters}

 
Sometimes making gifts means a whole lot more than buying them. I know I enjoy making gifts & love receiving little homemade lovelies! Earlier this month, I celebrated three birthdays for three lovely ladies in life. My Mother, a best friend & my amazing boss! Now, my Mother LOVES Stein Mart, so it's a given 9 out of 10 times she's gonna get a Stein Mart gift card as her gift, she just loves it so much! I did win her an engagement ring makeover, that was a birthday gift in itself, but I'll save that for another post! For my boss & best friend, I made some pretty picture and cracked glass coasters. These are so simple to make & you can personalize them!

Supplies for Picture Coasters
4"x4" tiles (you can get these at Home Depot)
White tissue paper
Printer
Tape
Scissors
Mod Podge (Matte or Gloss)
Paint brush
Krylon acrylic clear coat sealant
Black felt
Hot glue

Print 4x4 images (or whatever size your tiles are) onto your white tissue paper. To print on tissue paper, you will need to tape the edges of the tissue paper to something like card stock, I used a magazine cover, and then feed it through your printer.

After you have printed your images, let them dry, and then carefully cut them out.


Apply a thin layer of Mod Podge to your tile and lay your tissue paper picture over it, smoothing out any bubbles as carefully as possible so you don't rip the tissue.


Let that dry completely and then apply a thin layer of Mod Podge over the tissue. I would suggest doing 2 layers. Let the first layer dry completely before applying the second coat.

Your Mod Podge will dry clear

After you have done your two layers of Mod Podge let the coasters dry completely. Once they have dried you can now spray them with your Krylon acrylic sealant. I would suggest doing two layers of this as well, letting each layer dry completely.


When the coasters are fully dry you can now hot glue your felt to the back.
 
These cracked glass coasters are really neat! I found these at Home Depot in the tile section. All I had to do was hot glue felt to the back and voila! Super cute coasters!

Secure your coasters together with some ribbon and you're all set! I hope you enjoyed this tutorial!

Happy crafting y'all!

Linking up HERE ♥